
(213) 319-3339Dermatologist in Downtown LA
Spectra MDF provides fractional laser treatment with less recovery than traditional ablative CO2 resurfacing. It can be used for selected concerns involving texture, scars, pores, and uneven tone.
The FDA clearance names no skin types, so your provider chooses the settings for your skin. Darker skin tones

Reviews across our five offices. Read patient reviews
Spectra MDF is available at our Downtown LA, Brentwood, Pasadena, and San Jose offices.
Your plan and cost are set at your consultationSpectra MDF is fractional laser resurfacing on the Hollywood Spectra laser, made by Lutronic (now part of Cynosure Lutronic), using its microbeam handpiece. Instead of one solid beam, the handpiece delivers the laser as a grid of fine, high-energy dots. Lutronic calls it the Multi-Depth Focus handpiece; the FDA clearance calls it a dual focused dots microbeam handpiece.
You may also see it called Spectra FX.
It occupies a useful position between very gentle treatments and deeper resurfacing. Settings can be adjusted based on how much correction is needed and how much downtime the patient can accommodate.
At Metropolis Dermatology, Spectra MDF laser resurfacing is offered in Downtown LA, Brentwood, Pasadena, and San Jose. The same Hollywood Spectra laser, used with its other handpieces, treats unwanted pigmentation, uneven tone, and selected tattoos; that work is on the Hollywood Spectra page. Costa Mesa offers resurfacing on other lasers.
The Hollywood Spectra fires pulses that last billionths of a second, at 1064 nm or 532 nm. The energy is absorbed so quickly that it heats tiny targets in the skin almost instantly.
The microbeam handpiece splits the beam into many fine dots across an area about 8 mm wide at 1064 nm, or 6.9 mm at 532 nm. The skin between the dots is left untreated.
In studies of similar fractional lasers, the effect depends on energy and focus: tiny pockets can form beneath an intact surface, or, at higher energy, tiny spots on the surface are removed and heal over within days. Heat also changes the collagen in the upper layer of the skin.
We select the technology, wavelength, depth, and settings based on your skin rather than asking your skin to fit a particular device.
Lasers are FDA-cleared, not FDA-approved: the FDA found each device equivalent to one already on the market, for the specific uses named in its clearance. Where a use is not named, we say so.
| Use | FDA clearance | Read more |
|---|---|---|
| Acne scars | Cleared: "skin resurfacing procedures for the treatment of acne scars and wrinkles," at 1064 nm and 532 nm, including microbeam handpieces | Laser scar treatment; acne scarring |
| Wrinkles | Cleared, in the same resurfacing indication | Skin resurfacing |
| Dark marks after acne or inflammation | Cleared at 532 nm, including microbeam handpieces: "Treatment of Post Inflammatory Hyperpigmentation" | Hollywood Spectra |
| Enlarged pores | Not a cleared use. Pores are not named in the clearance | Enlarged pore treatment |
| Texture and uneven tone | Not named as such. Specific causes, such as sun spots and dark marks after inflammation, are cleared uses of the same laser | Skin resurfacing |
| Surgical, injury, and raised scars | Not a cleared use of this device | Laser scar treatment |
| Skin tightening or lifting | Not a cleared use. Not named in the clearance | Skin tightening |
When a use is not in the clearance, your provider explains why Spectra MDF may still be recommended for you, and what else could work.
The microbeam handpiece arrived with this 2022 clearance. Lutronic's earlier Spectra laser, cleared in 2012, had no microbeam handpiece; the FDA compared the new handpiece with the microbeam handpiece of another maker's laser.
The same laser, in a separate long-pulse mode without the microbeam handpiece, is cleared for mild to moderate inflammatory acne. For active breakouts, start with acne and acne scarring.
FDA clearance status checked against FDA 510(k) records on 8 November 2026. Every device we use
Timing matters after isotretinoin. The medication label advises waiting at least 6 months before laser resurfacing or dermabrasion; some gentler treatments may be possible sooner, and your dermatologist will time each step.
The right treatment is not automatically the strongest one. It is the one that appropriately balances the amount of correction your skin needs with the downtime, risk, and recovery you can accommodate.
Skin type is one of the first considerations in any laser treatment, not a footnote. Different wavelengths and technologies interact with pigment, blood vessels, water, and tissue in different ways. The device matters, but so do the settings, technique, and experience of the person using it.
The FDA clearance for the Hollywood Spectra names no skin types. Darker skin is more prone to burns and dark marks after laser treatment, and the main risks are burns, blistering, and patches that turn lighter or darker than the surrounding skin. A recent tan raises the risk further.
With fractional lasers, both the energy and how densely the dots are placed affect the risk of dark marks, so your provider adjusts both for your skin and may suggest a test spot first.
Published studies of similar fractional nanosecond 1064 nm lasers from other makers included skin types II to IV for acne scars and III to VI for skin rejuvenation, and reported no lasting lighter or darker patches. They were small, looked back at past patients, and had no comparison group, so they are a reason for care rather than a promise.
Our technology was selected to treat a broad range of skin tones and concerns thoughtfully. If the treatment you requested is not appropriate for your skin, we will explain why and recommend a safer or more effective alternative.
Tell us what you notice, what you want to change, and how much downtime you can accommodate. We will evaluate the rest and build a plan around you.
Metropolis Matrix Protocol. Built for scarring and texture: subcision with Sculptra, Spectra MDF, then microneedling with PRP on top. Microneedling devices are FDA-authorized for facial acne scars, but not for delivering PRP into the skin, and using Sculptra for acne scars is off-label.
Metropolis ONE Protocol. The full depth version, treating all four layers of the skin: RF tightening, Spectra MDF for the deep dermis, RF microneedling at medium depth, a resurfacing laser, then exosomes and topical Sculptra. The FDA states there are currently no FDA-approved exosome products, and applying Sculptra to the skin surface is outside its label.
Technology provides options. Knowing which device to use, and how to use it, is what makes those options meaningful.
| Device | What it is used for | Recovery |
|---|---|---|
| Spectra MDF | Fractional resurfacing, a middle option for early texture change or uneven tone | Less downtime than eCO2 |
| LaseMD Ultra | A fractional pattern of microscopic channels, leaving the surrounding skin intact | Redness typically settles within a day |
| Genius RF Microneedling | Acne scars, uneven texture, enlarged pores, and mild skin laxity | Depth and settings are adjusted for the concern, area, and skin type |
| eCO2 and EdgeOne CO2 | Significant texture irregularity, scarring, or sun damage that has not responded to gentler options | Real downtime, typically a week or more |
| UltraClear (Costa Mesa) | Pigmentation, uneven tone, texture, wrinkles, scars, and more advanced resurfacing, depending on the mode | Adjusted with the degree of treatment |
| Hollywood Spectra | Pigment, tone, tattoos, and the carbon laser facial | Low for the carbon facial; varies by use |
Spectra MDF, LaseMD Ultra, Genius and Hollywood Spectra: Downtown LA, Brentwood, Pasadena, San Jose. eCO2: Brentwood and San Jose. EdgeOne: Pasadena. UltraClear: Costa Mesa. All our technology
| Effect | What to know |
|---|---|
| Redness and swelling | Expected after treatment. With a similar laser, redness lasted about nine days on average in one study. |
| Small crusts | Can form over the treated dots and usually clear within several days to weeks as the skin heals. |
| Darker or lighter patches | Among the most frequent longer-term complications of laser treatment, and more likely in darker skin and after sun exposure. Energy and dot density are set to lower this risk. |
| Burns and blisters | Can happen when too much energy is delivered or the skin is not cooled enough. Blisters usually heal without scarring when treated promptly. |
| Cold sores | Can flare after laser treatment, more often after ablative lasers. If you get cold sores, you may be given an antiviral medicine first. |
| Scarring | One of the most serious late complications of laser treatment. |
| Less change than hoped | A laser cannot get rid of a scar; it replaces it with a less noticeable one, and improvement builds slowly. |
Call us if, after treatment, pain keeps getting worse, or you notice blisters or grey patches on the treated skin.
It is fractional laser resurfacing on the Hollywood Spectra laser from Lutronic, using a microbeam handpiece that delivers the laser as a grid of fine dots. At Metropolis Dermatology it is used for acne scars, wrinkles, and texture, at four offices.
Yes. Spectra FX is another name for the same fractional treatment on the Spectra laser.
Yes. The Hollywood Spectra was FDA-cleared in February 2022 (510(k) K213569) for skin resurfacing procedures for the treatment of acne scars and wrinkles, including with its microbeam handpieces. Enlarged pores and skin tightening are not named in the clearance.
Metropolis before and after photos are in our gallery, shown with each patient's consent. Results vary, and for scars the goal is a less noticeable scar, not one that is gone.
Plans and costs are set at your consultation, once we know what you want to change and which treatments fit. The price of a Hollywood Spectra laser plan depends on what we are treating and how many sessions it needs.
No. The Hollywood Spectra fires nanosecond pulses, billionths of a second long. Pico lasers fire picosecond pulses, which are shorter still. In studies, a focused fractional nanosecond 1064 nm laser produced effects under the skin similar to those of fractional picosecond lasers. Pico lasers are used mainly for difficult pigment and tattoo ink; see pico laser.
Less than with ablative CO2 resurfacing. Expect redness, mild swelling, and small crusts for some days; in one study of a similar laser, redness lasted about nine days on average. Your provider adjusts settings to the downtime you can accommodate.
Pores are not a cleared use of this laser, and no treatment removes pores for good. Over time, treatments that improve oil control, texture, and collagen support can make pores appear smaller. Enlarged pore treatment
It can be used carefully, with energy and dot density chosen for your skin. The clearance names no skin types, and darker skin is more prone to burns and dark marks after laser treatment, which is why skin type comes first in the plan. Darker skin tones
Insurance is accepted for eligible medical care. Health insurance generally does not cover cosmetic treatments, so our team confirms costs before your first session.
Downtown LA, Brentwood, Pasadena, and San Jose. In Costa Mesa, resurfacing is done with other lasers, such as UltraClear.
Sources: FDA 510(k) K213569, Hollywood Spectra; American Academy of Dermatology on laser scar treatment and skin conditions lasers can treat; Mani and Zorman, fractional nanosecond 1064 nm laser for acne scars (2021); Nguyen and colleagues, complications of laser procedures (2026); Harnchoowong and colleagues, dark skin (2024); Fu and colleagues, 2019.
Spectra MDF is available at four of our five offices.




Costa Mesa offers resurfacing on other lasers, such as UltraClear. What patients say.
6 dermatologists, 7 physician assistants and nurse practitioners. We match you with a provider based on your concern and each provider's clinical focus.













No providers listed for this office yet. See the full team.
Share what is happening with your skin and where you would like to go from here. We will help match you with the right provider and type of visit.