eCO2 and EdgeOne CO2. Fractional CO2 laser resurfacing in Los Angeles and San Jose

eCO2 and EdgeOne are fractional ablative CO2 lasers designed for more significant resurfacing. They may be considered for deeper texture irregularities, acne scars, wrinkles, and sun damage that may not respond sufficiently to gentler treatments.

Studied in Fitzpatrick skin types III to IV, fractional CO2 studies fractional CO2 studies

Made by Lutronic (eCO2) and Jeisys (EdgeOne). The FDA clearances name no skin types; studies of fractional CO2 lasers, not specific to these two devices, included skin types III and IV, so your provider reviews your skin before recommending one.

What it is cleared for
What patients say

4.7 on Google from 1,073 reviews.

Reviews across our five offices. Read patient reviews

The eCO2 is available at our Brentwood and San Jose offices, and the EdgeOne at Pasadena.

Your plan and cost are set at your consultation

What the eCO2 fractional laser is.

The eCO2 is a fractional CO2 laser made by Lutronic, now part of Cynosure Lutronic. CO2 is carbon dioxide: the laser uses it to produce a beam of infrared light at a wavelength of 10,600 nm.

What does eCO2 mean? It is a trade name, not a medical term: Lutronic's name for its line of fractional carbon dioxide lasers. The line appears in FDA records from 2008, as the Mosaic eCO2, followed by the eCO2 in 2009, the eCO2 Plus in 2011, and the current eCO2 3D, cleared in July 2025.

These treatments involve meaningful recovery. Depending on the depth and intensity, downtime is often a week or longer. We recommend them when the potential degree of improvement justifies the additional recovery and risk.

10,600 nmInfrared light absorbed by the water in skin
FDA-clearedeCO2 3D, 510(k) K244060, July 2025; EdgeOne, K162169, October 2016
3 officeseCO2: Brentwood, San Jose. EdgeOne: Pasadena
DowntimeOften a week or longer, depending on depth and intensity

The EdgeOne is a fractional CO2 laser made by Jeisys Medical of Seoul, Korea, and FDA-cleared in October 2016. It works at the same 10,600 nm wavelength and comes with one fractional handpiece and two surgical handpieces.

Looking for a CO2 laser in Los Angeles or San Jose? We use the eCO2 at our Brentwood and San Jose offices and the EdgeOne at our Pasadena office. Downtown LA uses the Alma Hybrid CO2 laser, and Costa Mesa offers resurfacing with UltraClear.

How the eCO2 laser works.

Water absorbs the light

The CO2 wavelength, 10,600 nm, is near the peak of absorption by the water in skin. When that water absorbs the laser energy, it heats up so fast that the targeted tissue vaporizes.

Microscopic columns

With a fractional handpiece, the laser places a grid of tiny beams on the skin. Each one vaporizes a microscopic column of skin, which the FDA filing calls a micro ablative column, and the skin between the columns is left untouched.

Collagen

As the skin heals, it remodels. The FDA clearance for the Alma Hybrid states that clinical literature shows CO2 resurfacing of wrinkles increases the amount of collagen beneath the skin's surface.

Handpieces change the job

The eCO2's fractional handpieces use spot sizes of 120 and 300 microns for resurfacing. Its non-fractional handpieces, named F100, F50, Zoom, and a 500 micron tip, are the ones its clearance names for scars.

The EdgeOne's settings

The EdgeOne's fractional handpiece uses spot sizes of 120, 350, or 800 microns across a scan area of 15 by 15 mm, with an adjustable spot density.

Settings fit your skin

Your provider sets the power, the spot size, and how densely the columns are placed. Both the energy and the density of a fractional treatment affect the risk of dark marks, which is why settings are chosen for your skin rather than taken from a standard menu.

What the eCO2 and EdgeOne are FDA-cleared for.

Lasers are FDA-cleared, not FDA-approved: the FDA found each device equivalent to one already on the market, for the specific uses named in its clearance. Where a use is not named, we say so.

Each use, the FDA clearance wording, and where it fits at Metropolis (checked 8 November 2026)
UseClearance wordingFDA statusAt Metropolis
eCO2: fractional resurfacingFractional handpieces: "dermatological procedures requiring ablation (removal), resurfacing and coagulation of soft tissue"Cleared, eCO2 3D, K244060, 31 July 2025Skin resurfacing
eCO2: wrinkles, fine lines, texture120 and 300 micron spot sizes: "wrinkles; rhytides, furrows, fine lines, textural irregularities"Cleared, K244060Skin resurfacing
eCO2: brown spots and uneven color120 and 300 micron spot sizes: "pigmented lesions and vascular dyschromia"; non-fractional handpieces: "solar/actinic elastosis", "lentigines", "uneven pigmentation/dyschromia"Cleared, K244060Skin resurfacing, once a dermatologist has confirmed the spots are harmless
eCO2: acne scars, surgical scars, keloidsNon-fractional handpieces: "acne scars, surgical scars, keloids"Cleared, K244060, with the non-fractional handpieces. Acne scars are not named for the fractional handpiecesLaser scar treatment
eCO2: other named usesSurgical cutting and removal of soft tissue, and removal of growths such as skin tags and wartsCleared, K244060Not among the uses we list for the eCO2
EdgeOne: ablative resurfacingWith the scanning unit: "ablative skin resurfacing"Cleared, K162169, 27 October 2016Skin resurfacing, Pasadena
EdgeOne: wrinkles, acne scars, sun damageNot namedNot a cleared useYour provider explains why it may still be recommended

Neither clearance names a range of skin types.

The eCO2 3D filing states that no clinical tests were performed for it; it was cleared as having the same indications as the earlier eCO2 Plus. The EdgeOne filing lists electrical and laser safety testing and was cleared as equivalent to earlier CO2 lasers.

Clearances checked in the FDA 510(k) database on 8 November 2026. The earlier eCO2 (K091115, October 2009) carries the same fractional wording.

Is the eCO2 right for you?

Often a good fit

  • Deeper texture irregularities, acne scars, wrinkles, or sun damage that have not responded to gentler treatment
  • You can plan for a week or longer of recovery
  • The degree of improvement you want justifies the additional recovery and risk
  • Spots on the skin that a dermatologist has confirmed are harmless

Not a fit, or wait

  • A tan or sunburn on the day of treatment
  • Isotretinoin now or in the last 6 months, for laser resurfacing
  • Smoking: stop at least 2 weeks before
  • A history of cold sores: tell us first, because medicine to prevent an outbreak is recommended
  • Melasma: an overly aggressive treatment can trigger rebound pigmentation and leave the skin darker than before
  • Keloids: they require another approach entirely, and the wrong treatment can make them worse
  • A spot that has not been checked: confirmed harmless first, treated second

Timing matters after isotretinoin. The medication label advises waiting at least 6 months before laser resurfacing or dermabrasion; some gentler treatments may be possible sooner, and your dermatologist will time each step.

For scars, we begin by identifying the type of scar and what is creating its appearance. That determines the technology, treatment depth, settings, and whether laser treatment is appropriate at all. See laser scar treatment.

Your eCO2 treatment plan.

ConsultationTell us what you notice, what you want to change, and how much downtime you can accommodate. We will evaluate the rest and build a plan around you.
BeforeNo tan or sunburn; tell us about cold sores and isotretinoin; stop smoking as directed
Handpiece and settingsFractional or non-fractional handpiece, power, spot size, and density, chosen for your concern and your skin
SessionsGentler fractional lasers often mean more sessions; deeper CO2 resurfacing often means fewer, with more recovery
RecoveryOften a week or longer, depending on depth and intensity; crusts form and clear over several days to weeks as the skin heals
AfterwardProtect the treated skin from the sun until it heals
ResultsBuild gradually as collagen remodels

eCO2 or another resurfacing laser?

Technology provides options. Knowing which device to use, and how to use it, is what makes those options meaningful.

The right treatment is not automatically the strongest one. It is the one that appropriately balances the amount of correction your skin needs with the downtime, risk, and recovery you can accommodate.

Our resurfacing lasers compared, most intensive first
DeviceWhat it is used forRecoveryOffices
eCO2 and EdgeOneAn ablative fractional laser for significant texture irregularity, scarring, or sun damage that has not responded to gentler optionsOften a week or longereCO2: Brentwood, San Jose. EdgeOne: Pasadena
Alma HybridCO2 laser resurfacing, cleared for wrinkles, texture, uneven pigmentation, acne scars, surgical scars, and keloids (K251230)Deeper ablative treatment requires more recoveryDowntown LA
UltraClear and Laser-CoringA customizable fiber laser that can treat skin at different depths and levels of intensity; Laser-Coring addresses deeper wrinkles and foldsAdjustable; Laser-Coring has more recoveryCosta Mesa
Spectra MDFFractional resurfacing with less downtime than eCO2, a middle option for early texture change or uneven toneLess recovery than traditional ablative CO2 resurfacingDowntown LA, Brentwood, Pasadena, San Jose
LaseMD UltraA nonablative fractional laser for pigmentation, sun damage, uneven tone, texture, and overall skin qualityGenerally shorter than with ablative resurfacingDowntown LA, Brentwood, Pasadena, San Jose

eCO2 risks and side effects.

Skin type is one of the first considerations in any laser treatment, not a footnote. Different wavelengths and technologies interact with pigment, blood vessels, water, and tissue in different ways. The device matters, but so do the settings, technique, and experience of the person using it.

Most reactions are short-lived. This list is not complete; your provider reviews the risks for your device and skin.
EffectWhat to know
Redness, swelling, crustingExpected. Redness usually settles within hours to a few days; swelling can last several days; crusts clear as the skin heals.
DowntimeOften a week or longer after CO2 resurfacing, depending on depth and intensity.
Darker or lighter skin, burnsAmong the most common lasting complications, and more likely in darker skin. Darkening is often temporary but can last months.
Cold sore outbreak or infectionMore likely with ablative lasers, while the surface heals. Tell us if you get cold sores.
ScarringOne of the most serious complications. The risk is higher with ablative lasers and in darker skin.

Darker skin is more prone to burns and dark marks after laser treatment. Ablative resurfacing carries greater risks than nonablative methods, and with ablative lasers, people with darker skin have a higher risk of uneven color and of scarring.

Darkening is common, and it is often temporary. In one study of 82 people with skin types III and IV treated with a fractional CO2 laser, about 7 in 10 had temporary darkening afterward, and in about 1 in 3 it lasted longer than three months. In another study of ablative CO2 resurfacing, darkening usually appeared about four weeks after treatment and faded gradually over months.

Aggressive resurfacing without a plan can make it worse.

Our technology was selected to treat a broad range of skin tones and concerns thoughtfully. If the treatment you requested is not appropriate for your skin, we will explain why and recommend a safer or more effective alternative.

Questions patients ask about the eCO2.

What is the eCO2 laser?

A fractional carbon dioxide (CO2) laser made by Lutronic. It vaporizes a grid of microscopic columns in the skin, and the skin remodels as it heals. eCO2 and EdgeOne are fractional ablative CO2 lasers designed for more significant resurfacing.

What does eCO2 mean?

eCO2 is a trade name: Lutronic's name for its fractional CO2 laser. CO2 is carbon dioxide, which the laser uses to produce a beam of infrared light at 10,600 nm.

Is the ECO2 on a lab report the same thing?

No. The same letters also name some laboratory test products, which the FDA lists under clinical chemistry as enzymatic carbon dioxide tests. If you saw ECO2 on a lab result, ask the clinician who ordered the test. This page is about the laser.

Is the eCO2 different from a CO2 laser?

The eCO2 is a CO2 laser. It uses the same 10,600 nm wavelength as other CO2 lasers, including the EdgeOne. What differs is how the energy is delivered: a fractional handpiece treats a grid of microscopic columns and leaves the skin between them untouched, while conventional ablative resurfacing treats the whole surface. Fractional laser resurfacing has fewer complications than conventional ablative resurfacing.

Is the eCO2 FDA-cleared?

Yes, through a 510(k), which is a clearance for specific uses, not an approval. The current model, the eCO2 3D (K244060, 31 July 2025), is cleared with its fractional handpieces for resurfacing and for wrinkles, fine lines, textural irregularities, pigmented lesions, and vascular dyschromia, and with its non-fractional handpieces for uses including acne scars, surgical scars, and keloids.

What is the difference between the eCO2 and the EdgeOne?

Both are fractional CO2 lasers at 10,600 nm. The eCO2 is made by Lutronic and the EdgeOne by Jeisys. The eCO2 3D's clearance names more uses, including wrinkles and scars; the EdgeOne's names ablative skin resurfacing. We use the eCO2 in Brentwood and San Jose and the EdgeOne in Pasadena.

Can the eCO2 treat acne scars?

The eCO2 3D's clearance names acne scars, surgical scars, and keloids for its non-fractional handpieces. We begin by identifying the type of scar and what is creating its appearance, which determines the technology, treatment depth, settings, and whether laser treatment is appropriate at all.

How much downtime is there?

Depending on the depth and intensity, downtime is often a week or longer. Crusts form where the laser opens the surface and clear over several days to weeks as the skin heals.

How many sessions will I need?

Gentler fractional lasers often mean more sessions; deeper CO2 resurfacing often means fewer, with more recovery. Your provider sets the number for your skin and your goal.

Is the eCO2 suitable for darker skin?

The clearances name no skin types, and studies of fractional CO2 lasers, not specific to these devices, included skin types III and IV. Darker skin is more prone to burns and dark marks after laser treatment, so your provider sets the energy and density for your skin, or recommends a gentler option.

Which offices offer the eCO2?

Brentwood and San Jose. Pasadena offers the EdgeOne CO2 laser, Downtown LA the Alma Hybrid CO2 laser, and Costa Mesa resurfacing with UltraClear.

How much does eCO2 treatment cost?

Plans and costs are set at your consultation, once we know what you want to change and which treatments fit.

Sources: FDA 510(k) clearances K244060 (eCO2 3D), K091115 (eCO2) and K162169 (EdgeOne); the American Academy of Dermatology on skin conditions lasers can treat and laser scar treatment; Nguyen and colleagues, 2026 and Harnchoowong and colleagues, 2024; checked 8 November 2026.

Where to go

Where to get eCO2 and EdgeOne treatment.

The eCO2 is at our Brentwood and San Jose offices, and the EdgeOne at Pasadena.

The Brentwood lobby with its gold ginkgo wall
BrentwoodSuite 900Comprehensive Westside dermatology with particular depth in injectables, advanced lasers, resurfacing, skin tightening, and hair and scalp conditions.11645 Wilshire Blvd, Los Angeles, CA 90025
(424) 243-7668
Dermatologist in Brentwood
The Pasadena lobby with its arched desk wall
PasadenaSuite 930Medical, surgical, and cosmetic dermatology for multiple generations of families, with particular depth in skin-cancer care, acne, rosacea, and cosmetic planning.70 S. Lake Ave, Pasadena, CA 91101
(626) 514-1472
Dermatologist in Pasadena
The San Jose lobby with origami birds and a green tile wall
San JoseSuite 1000Medical and cosmetic dermatology for the Bay Area, with particular depth in advanced lasers, acne scarring, melasma, facial balancing, and care across diverse skin tones.111 N. Market St, San Jose, CA 95113
(408) 581-0161
Dermatologist in San Jose

Downtown LA uses the Alma Hybrid CO2 laser, and Costa Mesa offers resurfacing with UltraClear. What patients say.

Who provides eCO2 and EdgeOne treatment

2 dermatologists, 2 physician assistants and nurse practitioners. Ask when you book which provider performs CO2 resurfacing at your office.

James Y. Wang, MD, MBA
FounderJames Y. Wang, MD, MBADermatologistMedical and cosmetic dermatology, with a particular focus on advanced cosmetic evaluation, lasers and combination treatment planning.Downtown LA (cosmetic), Brentwood (cosmetic), Pasadena (cosmetic), Costa Mesa, San JoseView profile
Book an eCO2 consultation

Start with a consultation.

Tell us what you notice, what you want to change, and how much downtime you can accommodate. We will evaluate the rest and build a plan around you.

  • 4.7 on Google from 1,073 reviews
  • eCO2 in Brentwood and San Jose, EdgeOne in Pasadena
  • Plans and costs set at your consultation
Message us

Which office would you like to text?

Call an office

Which office?